ACE1000 Remote Terminal Unit

ACE1000 Remote Terminal Unit
Brand:Motorola Solutions
Model: ACE1000
The versatile and powerful ACE1000 will deliver the timely communications you need, without having to completely redesign your current system. In a new, compact package, the ACE1000 is the Remote Terminal Unit (RTU) that will facilitate higher reliability and interoperability at a lower cost. Its powerful processor combined with FLASH and RAM memory allows this RTU to be used in the most demanding SCADA environments. Easy to install and use with a web-based easy-programming tool, the ACE1000 Remote Terminal Unit (RTU) is great for starting a new SCADA system or adding to an existing one.
Available for order starting on August 1, 2014
Compact and Rugged Design
Ready for the field RTU in a more compact package
Motorola Radio Support
Supports all Motorola Radio systems (ASTRO, Tetra, MOTOTRBO)
Easy-Programming Tool (via WEB Browser)
Easy-to-use programming tool for new SCADA users or quick installation
RTC Back-up Battery
Back-up battery to ensure system reliability (at least 20 days @ 25C)
256 MB of FLASH Memory and 256 MB of RAM Memory
Large memory capability for storing and backing-up information
IECEx/ ATEX - EXnA IIC T4 (Cat 3/Zone 2)
Compliant with ATEX regulations (without radio, in ATEX approved enclosure)
9-30 VDC Input Voltage Range
Powerful processing for demanding SCADA environments
Sleep/Low-Power Mode
Power-saving option for when environment is not as demanding
3rd Party Modem Support
Cellular modem, leased line modem, data radio, and/or broadband radio support


Processor: Sitara CPU (Cortext-A8)
Operating System: Linux
Memory: FLASH 256 MB (32 MB for user), RAM 256 MB (16 MB for user)
Indicators: LEDS 4*Main + 1*LAN + RS232 (tx, rx)
Backup Battery: Coin Rechargeable Batter (at least 20 days)
Ethernet Ports: On board: 10/100 Mb/sec
Modem Support: Cellular modem, leased line modem, data radio, broadband radio
Motorola Radio Support: APX, MOTOTRBO
Multi-Drop: MDLC over Serial
Protocols: ModBus (Slave/Master over RS232/RS485 and Ethernet
   Main Board: RS232 (115.2kbps)/RS485 (460 kbps), Half/Full Duplex with/without CD
   Plug-In (Optional): Isolated 2 x RS232 (115.2 kbps)
Two-Way Radio: Digital MOTOTRBO, Digital Trunked Astro, Tetra
Program Transfer Capability: LTR Local (via direct connection) and FEP Remote
Firmware Transfer Capability: LTR Local (via direct connection) and FEP Remote
Date and Time Accuracy: NTP, GPS
16 and 32 Digital Input Modules: 12 x Wet DI Isolated, 8 x AI Isolated, Wet inputs, de-bouncing filter 10, 20, 30, 40, 50mS, fast counter 2KHz, Isolation to CPU: 1500V
8 and 16 Digital Output Relay Modules: 8 x DO Relay 2.5a, 4 x ML Form C (SPDT), 4 x EE Form C (SPDT), DO Frequency: 10 Hz
8 and 16 Analog Input Modules: 8 x AI Isolated, 0-20mA, 420mA or 0-5VDC, resolution:16bit, Accuracy = .1% of full scale, user configurable smoothing, user configurable
4 analog Output Module: Scaling, sampling rate - min. 10 samples per second
I/O Expansion Options: I/O Bus, Digital Inputs, Analog Inputs
Physical Dimensions (H x W x D): 6.3 in. (H) x 2.95 in. (W) X 4.4 in. (D)
Weight: 450 grams (without expansions)
Power Supply Options: Disabled, Run Mode, Idle/Sleep Mode, Low-Power Sleep Mode (CPU is off)
AC: 100-240 VAC, 47-63 Hz
DC: 9-30 VDC
Plug-In Power Supply: AUX 12 V out
Safety Standards: UL 60950-1, CSA 22.2-60950-1, IEC 60950-1/EN60950, AS/NZS 60950
Emissions: CFR 47 FCC part 15, subpart B (class A) EN55022:2003 Class A, EN61000-3-2, EN61000-3-3
Immunity: IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11
Mechanical Vibrations: EIA/TIA 603 Base station, Sinusoidal 0.07mm @ 10 to 30 Hz, 0.035 mm @ 30-60 Hz
Operating Altitude: -400 meters to +4000 meters
Operating Humidity: 5% to 95% RH @ 50C
Operating Temperature: -40C to 70C (excluding radios)
Storage Temperature: -55C to 85C (excluding radios)

64 East Midland Avenue | Paramus, NJ 07653